Today I started to style my Yamadori Larch in the warm February sun.
PPPPFFFFFF! There must be a better way to spend your day?! LOL!!!😉
Updates on this styling will follow here soon!
Cheers,
Hans van Meer.
Info: karamottobonsai@hotmail.com
———————————————————————————————————————————-
———————————————————————————————————————————-
Hi, everybody,
On Wednesday 6 February I was invited to do a (short) demo at the monthly evening club meeting of the B.A.B (Bonsai Association Belgium). This great club, which was founded by Bonsai master Mark Noelanders is responsible for staging the now famous yearly “Noelanders trophy” in Zolder Belgium. That’s why I know most of their members for many years now and I enjoyed myself immensely in this home away from home for me (and I like their beer).
I demonstrated on a Juniperus “media Phitzeriana Aurea” that I have been preparing for this first major styling for many years now! I found this tree in the cemetery where my dear old Mother I visit every week. The little tree was dug up from the ground with an excavator when some of the older graves were emptied. It laided there above ground, almost completely bare-rooted and frozen solidly for weeks on end. So I went to the caretaker and asked him what was going to happen to this old tree? He told me that it would be destroyed with all the other scrubs that were pulled from the ground, as soon as the ice was gone from the ground so that they could use their trucks again. So I asked him if I could save the trees live to make a Bonsai out of it? Luckily he gave me permission! Then I happily even managed to lift it onto my shoulders as well! But getting it into my car was something else! Man the place was like an ice rink and it looked more like skating than walking, but I made it to my car safely! I planted the tree in the pot it still is in now and from then on I gave it a lot of love and care. All the 8 or 9 years up to this demo were used to get the foliage to grow closer to the trunk and to get the same type of mature soft foliage on the whole of the tree’s foliage. Because the tree was so severely cut back when it was removed from the ground it had made a lot of immature and prickly foliage on the lower branches, it took me a lot of time to correct that stress response. This more than 60 years old tree is of a strange variety that reacts very poorly to the normal techniques I have used on other Juniperus Phitzeriana trees. Even the bark is of a strange greyish/light brown colour. So this tree was well prepared for this demo and was doable in the 3 hours I was supposed to have for my demo, but after Mark was through with the introductions and stuff, I was left with just 2 and a half hours! So I explained to the audience that this would be the first real styling of this prepared tree and then started to wire the tree like a madman. During my work, I explained how the tree was prepared to reach this point. I even managed to get some important deadwood work done to enhance the movement of the trunk and then quickly brought the main shape into the branches. I ended just in time and was happy that I was able to show this first stage in this future bonsai in this short time. Because there was no time to do fine wiring, the final image looks still rough, but you can see clearly where this tree is going in the future. I did a demo 5 years earlier here at this club on a yamadori Pine (last small picture). I made a drawing then to show how I was going to try to style this tree and how it would look in the future. I brought this same demo Pine tree I made then to this demo, together with the original design drawing. It was good to see and hear the positive reactions from the people when they saw that it is possible to make a future bonsai at a demonstration! I promised to show this Juniper at their club in about 5 years. But I hope to be back sooner here in this friendly club,
Above: The tree before the 2,5-hour demo started.
Above: Waiting anxiously for Mark (on the right) to stop talking so that I could begin my introduction talk and stylings work!
Above: Yes finally and now it is wiring like a madman to get finished in time!
Above: close inspection from knowledgeable club members!
Above: Only the main branches were wired to safe time!
Above: Than Jin and Shari were reworked or created, especially the straight right Jin needed work to give it some movement!
Above: Then wiring the last few branches so that I could start the actual styling of the whole image!
Above: Bringing all the branches and foliage into the desired position.
Above: And then a well-deserved very nice cold Belgium beer!
Above: The end result for now. Note that no fine wiring was done so I was actually very pleased with how the tree looked despite that! And note the optical trick I did to give that completely straight Jin some visual movement! Not bad for only 2,5-hour!
Above: On the right the drawing that I made 5 years ago for the first styling of this Mugo Pine Yamadori that I did here at this club and on the left how this Bonsai (named Z) look to date. Looks pretty close to the original design…he said a bit proud! 🙏👍 I enjoyed myself immensely again at Mark’s very friendly club and I hope to be invited again in the future?!
Cheers,
Hans van Meer.
Info: karamottobonsai@hotmail.com
—————————————————————————————————-
HI everybody,
last week we had a spell of unusually warm and sunny weather over here, so I decided it was about time to do the first major styling I have planned for several of my trees for this year. The large Yamadori “Larch” in this story was ready for its second branch structure styling.
Check out: “THE STORY OF XL PART I” on my YOUTUBE channel!
I really took my time, working on this tree. Enjoying every minute of that relaxed and zone like feeling that comes over me when I’m guiding the branches of the tree as closely, as safely as possible, to their envisioned future shape. Overcoming or incorporating little problems, that I came across while working, without giving it any real thoughts. Sometimes things just fall together when I am working on an old tree like this one, when instinct takes over, with the sun in your face….MMMMMM! 🙂
Remember it is only the second structure styling, the top will fill out and thicken quickly in the next couple of years and there is about an Inch more trunk hidden behind the rime of that plastic container, as you can see in one of the pictures! In real life, the tree is taller and the base is wider and the whole tree is looking more balanced.
The first picture is taken when I just started to work.
In a few months, after all the Spring work is don, I will start working on the deadwood.
I hope you enjoy this little story,
Hans van Meer.
Info: karamottobonsai@hotmail.com
—————————————————————————-
—————————————————————————-
Dear Bonsai friends,
thank you all for visiting my Blog so often. I am honoured by your interest in my work and it inspires me to go on in the direction I have chosen for my Bonsai. I have high hopes for 2008, I am already asked to do workshops and demo’s in Belgium, Denmark, Italy, Norway, and England and a long visit to the USA in May is in the making! To do so much travelling to show what I like to do so much is like a dream come true! To see so many new countries and places to meet many new Bonsai friends…I can hardly wait for the New Year to begin! And, only in just a few weeks, it is off to Belgium for the annual Noelanders Trophy. I will be showing 3 Bonsai in the show and more important will have 2 days of fun with all my Bonsai mates that come every year to this very friendly event, from every corner of Europe!
And some of my Yamadori are up for their second and third styling, so that is exciting to for me. I will take lots of pictures and post them first here on my blog as soon as possible! You are welcome anytime here to visit my blog or my YOUTUBE channel, where you can find lots of videos of my work and progressive stories of my Bonsai. https://youtub.be/hjp1tfEPJB0
Thanks for visiting, it is highly appreciated!
Hans van Meer.
Cheers,
Hans van Meer.
Info: karamottobonsai@hotmail.com
—————————————————————————————————
Hi, everybody,
we are going through a period of cold weather here, and as usual, I am too late preparing the winter shelter for my trees. So this afternoon, in freezing cold weather, I had to do some last work on it. BBRRRRR! When I was bringing my last trees into the winter shelter, I noticed how beautiful the winter colours on my “Ulmus” looked. So I made a quick photo set up in the fading pale winter sunlight and with the shivers, I shoot the picture below. This is one of my earliest bonsai and one of my favourites. Because of the millions of “Ulmus” malsai that have been sold in Europe over the last 20 years, they got stigmatized as inferior bonsai material. In my opinion that could not be further from the truth! I think that “Ulmus parvifolia” are wonderful to work with and very affordable, available and forgiving ( this one is frozen solid for 3 days now). And I think they look pretty amazing in these bright winter colours! I hope you like the Picture?
Regards,
Hans van Meer.
A “ULMUS” WINTER CREATING.
Info: karamottobonsai@hotmail.com
———————————————————————————————–
Hi, everybody,
I Must admit that Irene mailed here pictures a while ago, but I have been very busy and to be honest, there is not that much to do on here “Yew” except for some branch shortening. As you can see in the pictures, Irene’s tree is very healthy and has plenty of new growth. So now it is safe to shorten them to long and too thick branches, which are of no use in any future design. Try to do this half an Inch above a healthy side shoot. You can cut the thick branch (in the third picture) just above the “Yellow” line. Seal the wound with “cut paste”. This will promote a lot of new growth along those cut branches and hopefully lower the now bare branches. We just need to have a bit more foliage, for me to choose the best design for this “Yew”, this means that we have to start practising the most important task in bonsai…..being patient! I have made some red lines on the pictures for help. If there is enough foliage next season we might start the first styling. Time and Irene’s good care will tell!
Cheers,
Hans van Meer.
Hi, everybody,
my workshop weekend at “BURRS” (UK) 10 & 11 November 2007
For the second year running, I was invited by my dear friend Tony Tickle to do a weekend-long workshop in his (the now already legendary) “BURRS” Bonsai Residency Workshops in the UK. Together with Enrico Savini and his student Ivo from (Italy) and my good friend Terry Foster we worked with almost 30 bonsai friends from all parts of Europe, with wonderful material. The bunkhouse where this bonsai weekend takes place is situated in a park with nothing else but a pub across the road….how lucky can you get? And on Saturday night there was wonderful food and later, all kind of whisky was there to sample, while Enrico and Ivo gave a demo on a magnificent Pine and I worked on a “one branch” Yew from my mate Terry. Again it was a great success for everyone, I had a wonderful time with my old friends and made some new once this time! And in November 2008, Enrico, Ivo, Terry and me will be back for more and so is everybody else that was there, because it was fully booked, the minute this last one ended! I hope you enjoy the images of this, yet another, great “BURRS” Bonsai weekend!
I arrived early Thursday night “Very relieved” at John Lennon airport Liverpool. I took off from Amsterdam in the middle of a heavy storm! Just after the bumpy take-off, the plane just fall down for a (long) couple of seconds! Everybody screamed and the sleeping guy next to me crept hold of my leg. Then there was an enormous bang when the plane got hold of some air again! It scared the living shit out of me and I had to re-swallow most of my meal for the second time. So In a panic, I tried to take an anti-air sickness pill, but I had nothing to drink with me on board (thanks to you know who?), so I tried to swallow the thing without any water! Trying to swallow a pill the size of a small golf ball, with a dry mouth from fear, is simply impossible! And so the damn thing started to melt on my tongue, so I had to spit it out! After that, it took several hours before I finally could speak again without a lisp! But until this day, I still not got my normal taste back in my mouth! After a bouncy landing, my humour got quickly better, when I met up with Tony, who brought me to his car where Enrico and Ivo were already waiting. Along the way to my house of Terry, where I would stay during the weekend, we had an animated talk about… well stuff!! 😉 They dropped me off at Terry and Charlot’s place, just in time for a lovely home-cooked big and juicy pepper steak, fresh from the Hills (I’m drooling on my keyboard again)! Then some beer and a film on his wall-size television and then (around 2) off to bed, for a short night. Early in the next morning while, Terry was making a large breakfast, I had a chance to wander through his amazing collection of bonsai. I admire Terry’s delegate style and I would like to share some of his lovely Bonsai that I saw that cold morning. Enjoy!
Bellow: Terry’s garden.
Bellow: One of my favourites: A lovely small “Hawthorn” on a piece of rock that seems to be made for this tree. Terry himself self-found this rock as well.
Bellow: A great “Yew” on another wonderful rock and another of Terry’s famous “Hawthorns”.
Below: Later that morning we were joined by Tony, Enrico and Ivo. Under the pleasure of warm coffee and croissants, Enrico and Ivo had a long look at Terry’s trees, Especially this old and very twisted “Yew” had their intention!
Below: Then Tony drove Enrico, Ivo and me, up North, to a magical place. I have been there before, but Enrico and Ivo saw this wondrous place for the first time. You can find there very ancient trees, like this beautiful “Yew” tree. You only have to stick it into a pot and voila! But any collecting here is out of the question!
Below: Then we had some typical English lunch in a lovely old tavern in a very small village!
Below: After this lunch, we drove further up North to look for “Yamadori”. Tony drove his 4-wheel drive right up to the top of a small mountain. It was wonderful up there.
Below: Look what I found buried under a massive rock!
It took some work to free this amazing Yew from under that large rock that you can still see on the left of the tree. And because this old “Yew” grew on a large piece of flat rock its roots spread is awesome!
Below: Happy me, with a beautiful “Shohin” sized Yamadori “Yew”.
Below: Ivo guarding our newly found treasures!
Below: is a Picture with a Press release. As posted on the IBC NEWS forum:
BBC News London.
Northern England:
Today, late in the afternoon, high on the south side of mount “Glenn Morecock”, after a tip received from a Dutch backpacker, 3 odd-looking persons were caught in the middle of some sort of strange and suspicious ritual.
Pati O’furniture, the mountain ranger who apprehended the suspicious man said: It must have been around Sunset when I finally stumbled on these 3 weird behaving men! I caught them on camera, just in the middle of some sort of bizarre offering! The man on the left, stood there with a silly grin on his face, holding, what seemed to be a bare-rooted Yew. While the man in the middle kept repeating with an obvious foreign accent the same lines over and over again: I am only the translator, where is the pub?! A little further up the hill the third man, kept mumbling: Damn those cheap contact lenses!
All three persons were taken down the mountain, during which several telephone calls were made by the man in the middle to his wife. After further investigations, everything seemed to be a misunderstanding based on a falls tip! The three men were immediately released, with apologies. The Dutch backpacker was last seen driving on the road to Liverpool, with a trunk full of small trees and a big grin on his face!!!! 
——————————————————————————————————-
Below: Sorry for the poor quality of the next 3 pictures, bud it was very stormy and I was very cold! LOL. The 3 “Yews” were left soaking in water overnight, so their roots could fill up with water. Then early the next morning, Terry and I planted them in suitable plastic containers (look at the amazing roots), in a mixture of Akadama and Biosorb (cat litre). Terry is an expert in these little gems, so I let him do most of the work. LOL. The trees were firmly attached in their containers so that there would be no change of root damage when moved.
Then it was high time to leave for “Burrs” where people were already hard at work!
The next pictures are made by several participants, but I know they don’t mind me sharing them here with you all!
Below: This is what bonsai heaven looks like from the inside! A Saturday and Sunday of pure FUN!
Below: Mick, working on a “Yamadori” common Juniper, came together with Morea, over a very stormy sea all the way from Holland.
Below: Less concentrated at work.
Below: Me bending Daves’s “Juniper” and Ian is waiting for it to snap! The branch was hollowed out and filled with lengths of aluminium wire, then raffia and tape to protect it from breaking.
Below: Ivo and Enrico discussing John’s “Itoigawa Juniper” and me on the right ears dropping.
Below: Discussing trees helps! Here is the finished tree of John.
Below: The design for Bob’s Pine.
Below: Happy Bob with his finished tree!
Below: Dave and Terry working hard on Dave’s “Yew”.
Below: The lovely end result!
Below: Chris worked very hard for two days preparing his big “Scots Pine” for styling.
Below: Terry and me helping Chris with his tree.
Below: A too-low-end picture of the finished result.
Picture 30: Enrico and Ivo splitting a “Juniper”.
Below: Some people kept on working, way past their bedtime!
On Saturday evening, after a hard day’s work, followed by a great meal, it was time for the boys and girls to sit back and relax while enjoying a wide ranch of alcoholic drinks, and snacks and watching an informal evening demonstration by Tony, Enrico & Ivo and me.
The “Burrs” Saturday evening demonstrations.
Tony planted a beautiful small “Yew” on a very heavy stone he earlier prepared. I still don’t understand how he managed to get that big hole in that hard rock.
Enrico and Ivo demonstrated on Tony’s Big Yamadori “Scots Pine”. It was an enormous transformation, made possible by Enrico’s great technical knowledge and beautiful style. Some extreme heavy bending was done by these two, and it was great fun for me to throw a heavy metal oven tray on the floor behind them, while they were very concentrated bending the thickest branch! Boy, can those Italians jump high! LOL :). The outcome of their hard work was absolutely amazing!
My demonstration was on an elegant, “one branch” Yamadori “Yew” from Terry. The deadwood whirls around the whole length of the slim trunk, so I decided to go along with the character of this tree. I made the one life branch dance around the back of the tree, towards the front again, in harmony with the gentle movement of the tree. The opening that you see between the branch (in raffia) and the trunk, looks much less obvious in real life. Breaking the rules about not crossing branches? But that was on purpose and necessary because of … hé if it works…who cares?!
Below: Sitting down to draw my design for the tree and to take off the weight of my back, was absolutely killing me!
Below: And this is what was waiting for use on the Sunday morning before the last day started.
And after the last day of intense and hard but fun work, it all came to an end way too soon! I enjoyed myself immensely and found it a great privilege to work with such enthusiastic Bonsai fanatics, who trusted us enough, to work with them on their loved and valuable trees, without any hesitations! Well, Enrico, Ivo, Terry and me are invited to do it all over again in November 2008, and I have heard it is already fully booked again! I can’t wait!
I hoped you enjoyed this “Burrs” story?
Cheers,
Hans van Meer.
Info: karamottobonsai@hotmail.com
——————————————————————————————
Hi, everybody,
I can clearly remember the day that Danny User asked me to demonstrate at his 2007 “Ginkgo award”! He called me (which he never those) at work and asked if I had something to do in September of next year? And if not, would I like to demonstrate at his next and last “Ginkgo awards”? He knocked me right off my feed and I accepted with a full-hearted YES!!! The “Ginkgo award” holds a special place in my heart and to demonstrate there is and was a dream come true for me, so I could not be any happier!
Two days before the event I drove to Danny and Ingrid Bonsai Centre “Ginkgo” in Belgium to bring in my 4 bonsai that were selected for the show, and to find a suitable tree for me to demonstrate on among the literary many hundreds of raw materials that you can find there. After I brought my Bonsai to where they were photographed for the commemorative “best Bonsai in Europe” book, I headed outside to look among the many hundreds of trees to find an inspiring tree. But even with this many choices, finding a tree among the many that Danny has in his enormous place is not as easy as it might seem! I searched for the right tree as if I was buying it for my own collection. The tree had to appeal to my taste in Bonsai and tickle my imagination at the same time. My demonstration trees always reflect where I’m at that moment in Bonsai and it must always end up looking the same as when I had styled it in my own garden as a future Bonsai for my private collection! A big part of my Bonsai collection today, still consists of my former demo trees. After a long search, I ended up with two possible candidates! Both Yamadori “Yews” are from Japan. One with a lot of fantastic deadwood to work on with heavy machines, but almost now foliage to work with. And one with a lot of problems to solve, but enough foliage to work with. They both had a good possibility to demonstrate and to become a good pre-Bonsai that reflected my approach, taste and style. Because working on the first tree mend, I had to be doing wood carving for most of the two-day demonstration, making a lot of noise with my power tools, and bothering the other demonstrators and the stand workers that were all in the same big greenhouse with me! So I chose the second tree, it was more challenging for me anyway, with a lot more nice Yamadori problems to solve or incorporate into the design that I envisioned when I first looked at this lovely tree. The tree gave me lots of good Bonsai vibes!
Picture 1: shows the chosen front of the tree.
Picture 2: shows me when I just discovered my demo tree.
Picture 3: shows the very hot demonstration airier. Some big names with on the far right, U can just see William “Bill” Valavanis from the USA, next to him Udu Fisher from Germany, next to him Sandro Signeri from Italy and I’m the one on the left and I’m from Holland.
Picture 4,5,6: The start of my demo, Here I am cleaning and plucking the branches to prepare them for wiring.
Picture 7: here you can see me removing the too-long and too-highly-placed top branches. Leaving some stumps that might be useful later, when I start working on the deadwood design!
Picture 8: Here I am looking where the all-important live lines of the tree are running. I do this with a small sharp chisel, peeling away the bark until I reach the live parts. In this case that was quite difficult to determent, because of the little difference in colour between the life and the dead part. So needless to say: I had to be very careful.
Picture 9: After I was really sure where it was safe to work, I could start working freely, without any fear for the health of the tree in the back of my mind. All I just had to do, was stay between the lines! I worked with both power tools and hand tools to first remove all the rotted wood and other unwanted parts. Then I just started to free flow, taking bits away, discovering a point of interest or beauty, a Little creating or revealing. But always working very carefully, following the grain of the wood. Gradually I worked towards the point where smaller bits were necessary on my power tool, to create, or reveal more detail in the deadwood. It is advisable to always wear Eye protection and always use a mask! The dust from working on a Yew with power tools is irritating to your eyes and can give you bad chest pain and cough for days! BELIEVE ME!!! I know what I’m talking about! (ugh ugh) :).
Picture 10, 11,12: My good old friend William van Vlaandre (inventor of the “SAMURAI” power tool bit), gave me one of his specially made power tools, loaded with his biggest “Samurai”, to use on the bigger parts of deadwood at the top of the tree. And it went like a warm knife through butter! Amazing you could make a small canoe out of a big tree in half an hour with this monster! Even the otherwise almost unworkable fresh and therefore wet wood, was no problem! It left a smooth surface! And with some care it was even possible to create more subtle details as well, it worked great! Only both my arms would disagree with these statements, they looked like I had been carrying 3 hedgehogs on fire! LOL! 😬😊
Picture 13: More detailed carving on the top “JIN”.
Picture 14: View of the demonstrating area.
Picture 15: The three top branches that would make up the whole top part of the tree, we’re way too thick to be bent with just wire! So they first had to be protected with tight applied layers of in water-soaked Raffia. Then 4 strings of copper wire were placed lengthwise along the part of the branch that needed to be bent. Then another layer of wet Raffia was applied and then some more normal wiring with thick copper wire on top of that layer. Now I was sure that I could bend the branches with minimal risk of harming the tree. It would only need great force!
Picture 16, 17, 18: Now I could safely start, to gradually bend the very tough branches into their desired positions. Taking my time, piece by piece, until I could secure them with the help of some thin copper wire attached to a couple of Jins and one small screw.
Picture 19: After a wild long night playing snooker (pool) with my Bonsai friends and only 4 hours of sleep, I started with the detail wiring of the tree. Trying to keep in pace with the marching band in my head!🥴
Picture 20: Finally the real fun part of styling a tree hat arrived. When I am bringing all the branches into position, I am totally in the zone, I love it, it is magical to almost paint with foliage until I feel it looks good. Trying to create something I like and find beautiful in Bonsai, within the boundaries of what each tree has to offer to me, is always a wonderful experience. To do it on this stage with this valuable material Danny entrusted me with, made it even more elevating and meaningful to me!
Picture 21: Close-up of the basic first deadwood on the back part of the tree and the branches.
Picture 19, 20: Some last detail works on the deadwood using a very hard plastic brush, that left a grain-like texture on the still soft fresh part on the top.
Picture 21: YES! I finished and was drained, but happy with the result and the beer that was waiting on the other side of the camera!
Picture 22: The final result. I hope you liked this little demo story and the final image of this pre-bonsai? It was, as I said before, a great honour to do! Especially because this was the last “Ginkgo award”! It was a very happy and a bit melancholic experience!
My “Ginkgo Award 2007” demonstration tree.
A “Taxus cuspidata“ Yamadori from Japan.
Cheers,
Hans van Meer.
Info: karamottobonsai@hotmail.com
———————————————————————————————-
The story of “BIG RON”.
Some were in November 2000, and my friends: Teunis-Jan Klein, Carlos van de Vaart and I made the long drive all the way to Milan (Italy) to look for some Yamadori material. After visiting some bonsai friends’ gardens in Milan, we arrived at NIPPON EN bonsai garden. There were some amazing bonsai on display and for sale and the yamadori material they had there was of very high quality! Some were lost among all these super yamadori I discovered the very old “Mugo Pine” of this story.
Pic. 1: In this picture, which is a still shot from a poor video, you can see the amazing “Hawk” like roots of this Pine, which looks as if it is lifting the earth. I fell in love immediately, but was scared of the leg of workable foliage on these almost “Octopus” long branches with only some spare foliage on the end!
Pic.2: Here you can see the backside of the tree. There is not much to work with here either! Only those few long branches you see in picture 1.
Pic.3: I could not resist the challenge of this massive tree and bought it from the owner of NIPON EN. He told me that it was one of the first yamadori he ever collected. He found it literally on the top of a very high mountain in the Italian Alps. And it stood in his gardens for many years, without much work done to it. And nobody seemed to be interested in buying it, because of the leg of foliage and age on those few branches. As there was no room for this big tree in the car that we came in and I did not have that much money with me as well, so I had to drive all the way back again to Milan Italy in May of the next year to collect it! And I was very excited when I made that long trip again with another old friend in my own (bigger) car. The former owner of this pine asked me to take care of it and I promised him, that I would try my best to make it beautiful! When I finally had the tree in my own garden I made this first drawing of the idea I had in mind for its future. Although (than) I had no idea how to reach it, this is what I saw.
Pic.4: And now just over 6 years later, this is the result. This tree made a big transformation in a very short time, with only one real scare during that whole time. A few years ago the tree lost its beautiful bark on the right side of the tree. I peeled the bark away and my heart almost stopped when I found out that the whole backside of the tree had died. I could easily remove all of the old bark of the already dry wood! I literally burst into tears, because I thought the tree might die and most certainly would never be like I hoped for it to be! After the first shock was over I tried to see what caused this dieback. I discovered then that the whole tree was hollowed out by “Wasps”, all the way true this thick tree, right up to the live bark on the bottom of this tree! I removed all the rotted deadwood with power tools and treated the remaining deadwood with Jinseal and then Wrapped the whole trunk of the tree with a screening cloth to keep the constant returning wasps out for 3 long years. But the tree remained healthy and strong! And looks actually much better with this great-looking deadwood, as if Mother Nature had the brilliant idea to help me with styling! I was tremendously proud to be able to show this old survivor I named “Big Ron” in this last “Ginkgo Awards Show”!
I think this Bonsai came a long way in a short time and I am glad I can finally show it to my friends here on my blog. The complete story of “BIG RON” can be seen on my website in the near future.
I hope you like it?
Hans van Meer.
Hi everybody,
I would like to share a picture with you I shot this afternoon of my old “Mugo Uncinata”.
In 2001 my wife and I travelled all the way to Switzerland to buy this and another Pine Yamadori from a well-known bonsai pro. After a few months in the growing season, the Pine still did not show any signs of growth! So I decided to check out the condition of the roots. I did not like the soil it was planted in after it was collected, it was some sort of grey gravel that stayed wet far too long and was really compressed. Carefully digging for some roots, my worst fears came true! There were no roots whatsoever to find! Only a small piece of tap root (4/5 inches) covered in clay was all that was left on the tree, all the other roots were simply cut off with a saw. You got to love those provisional collectors and sellers, don’t you?!
(Note: It is now 2022 and after all these years I am still **** off by how I was sold a tree without any roots by this well-known Artist/seller…shame on you!
Brokenhearted I repotted the tree into my own soil recipe and placed the tree in a protected spot in my garden, where I could monitor everything from Sunlight to water! And then I waited and hoped!
Well to make a long story even longer….this amazing old survivor recovered and today is thriving. It is still secured to the pot with its deadwood on the right, to support it until the whole pot is full of roots! Then this deadwood will be shortened up to the red line. Then the root base will measure 56 CM/22 INCH. With the length of this Pine being 58CM/23 INCH this is very impressive! There is only one live line on the left of the tree alive, twirling around the back of the tree, coming back into sight on the right of the tree, feeding the only branch left on it. From this branch, I created the whole image of this pre-bonsai. A few years ago I cut off an old branch from the left part of the root base. I scrubbed the wood with fine sandpaper, so I could count the year rings. I could not count them all because they were simply too thin! But the ones I could count, went way over the 300 years mark! Last year I removed pieces of dead wood from the back and top and did the same, and was really amazed to count way more than 400 rings! This might just be one of the oldest living trees in Holland! And still, it managed to survive without any roots for all that time!
I still have a long way to go with this amazing piece of history, but I’m not complaining!
I hope you like it so far?
regards,
Hans van Meer.
Info: karamottobonsai@hotmail.com
———————————————————————————————————-
The Bonsai Blog of Hans van Meer 