Hi, everybody,

On Wednesday 6 February    I was invited to do a (short) demo at the monthly evening club meeting of the B.A.B (Bonsai Association Belgium). This great club, that was founded by Bonsai master Mark Noelanders is responsible for staging the now famous yearly “Noelanders trophy”  in Zolder Belgium. That’s why I know most of their members for many years now and I enjoyed my self immensely in this home away from home for me (and I like their beer).

I demonstrated on a Juniperus “media Phitzeriana Aurea” that I have been preparing for this first major styling for many years now! I found this tree in a cemetery I visit every week.  The small tree was duck up from the ground with an excavator, when some of the older graves were relocated. It laid there above ground, almost completely bare rooted and frozen solidly for weeks on end. So I went to the caretaker and asked him what was going to happen to this old tree? He told me that it would be destroyed with all the other scrubs that were pulled from the ground, as soon as the ice was gone from the ground, so they could use their trucks again. So I asked him if I could save the trees live to make a Bonsai out of it? Luckily he gave me permission! Then I happily even managed to lift it  on to my shoulders as well! But getting it into my car was something else! Man the place was like a ice rink and it looked more like skating than walking, but I made it to my car safely! I planted the tree in the pot it still is in now and from then on I gave it a lot of love and care. All the 8 or 9 years up to this demo were  used to get the foliage  to grow closer to the trunk and to get the same type of mature soft foliage on the whole of the trees foliage. Because the tree was so severely cut back when it was removed from the ground it had made a lot of inmature and prickly foliage on the lower branches, it took me a lot of time to correct that stress  response. This more than 60 years old tree is of a strange variety that reacts very poorly to the normal techniques I have used on other juniperus Phitzeriana  trees. Even the bark is of a strange grayish/light brown color that even after cleaning won’t turn the usual red color. So this tree was well prepared for this demo and was doable in the 3 hours I was supposed to have for my demo, but after Mark was through with the introductions and stuff, I was left with just 2 and a half hours! So I explained to the audience that this would be the first real styling of a  prepared tree and than started to wire the tree like a mad man.  During my work I explained how the tree was prepared to  reach  this point. I even managed to get some important deadwood work don to enhance the movement of the trunk and than quickly brought the main shape into the branches. I ended just in time and was happy that I was able to show this first stage in this future bonsai in this short time. Because there was no time to do fine wiring, the final image looks  still rough, but you can see clearly where this tree is going in the future. I did a demo 5 years earlier here at this club on a yamadory Pine (last small picture). I made a drawing then to show how I was going to try to style this tree and how it would look in the future. I brought this same demo Pine tree I made then to this demo, together with the original design drawing. It was  good to see and hear the positive reactions from the people when they saw that it is possible to make a future bonsai  at a demonstration! I promised to show this Juniper at there club in about 5 years. But I hope to be back sooner here in this friendly club,   



                           Above: The tree before the 2,5-hour demo started.

Above: Waiting anxiously for Mark (on the right) to stop talking so that I could begin my introduction talk and stylings work!

Above: Yes finally and now it is wiring like a madman to get finished in time!

             Above: close inspection from the knowledgeable club members! 😉

                     Above: Only the main branches were wired to safe time!

Above: Than Jin and Shari were reworked or created, especially the straight right Jin needed work to give it movement!

Above: Then wiring the last few branches so that I could start the actual styling of the whole image!

Above: Bringing all the branches and foliage into the desired position.

                     Above: And then a well deserved very cold Belgium beer!


Above: The end result for now. Note that no fine wiring was don so I was actually very pleased with how the tree looked despite that! And note the optical trick I did to give that completely straight Jin some visual movement! Not bad for only 2,5-hour!

Above: On the right the drawing that I made 5 years ago for the first styling of this Mugo Pine Yamadori that I did here at this club and on the left how this Bonsai (named Z)look to date. Looks pretty close to the original design…he said a bit proud! 🙂 I enjoyed my self immensely again at Mark’s very friendly club and I hope to be invited again in the future?!                 


Hans van Meer.                 



3 thoughts on “MY DEMO AT THE B.A.B CLUB MEATING.”

  1. It really survived a couple of days (weeks?) in a bare-rooted state, meanwhile being frozen? That’s an amazing story of survival, and gives me hope for some of the shrubs I’ve seen scattered around my neighborhood.

    Anyway, nice job on both the juniper and the pine!

    Vriendelijke groet,



Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s