Category: MY WORK

Hi, everybody,

going through my old pictures, in preparation for the story of this Uncinata that I am currently writing for my website, I luckily came across these early pictures that I would like to show to you all.

Above: The first picture is shot in my garden, just after we came back from our trip to Switzerland where we had bought this old Pine from a well know Bonsai artist/seller.

Above: After a few months of waiting in vain for any growth and finding out that because of the terrible soil that was used, it was impossible to normally water the tree, I knew I had to act. So I started to carefully remove the top layer of the quicksand-like soil by hand, to check if there were any root problems. My worse nightmare came trough when I could not find any roots in the top layer. Or in the middle and not even at the bottom! All roots were simply sawed and cut off by the …… that collected it! The only thing that he had left on, was a soft to the touch and soaking wet sponge like tap root (yellow arrow), with one small root growing from it (green arrow). No wonder the tree was not growing!

Above: Here you can clearly see the empty space with no roots under need this beautiful old Pine. It is a wonder that it has survived this ordeal and is doing so well today! The life force is very strong in this old wonder of nature!

Above: I am so glad it is still alive today and that we are still able to enjoy the beauty of this at least 500+ years old tree! It is a real privilege and an honour to be able to work with this old survivor!

Cheers,

Hans van Meer.

Info: karamottobonsai@hotmail.com

—————————————————————————————-

You can find my earlier post about the “PEE PINE” HERE!

 Hi, everybody,

here are some pictures of my “PEE PINE” that I repotted today into a nice Tokoname pot.

Above: As you can see in this picture it was time to repot it. The strong roots had filed the whole bottom of the old pot it was growing in. I cut off that whole root mat you see laying in front of the tree. Leaving all the fine roots that grow closer to the root base.

Above: A close up of the wonderful deadwood. It makes this small Pinus Sylvestris look so mature and old!

Pinus sylvestris.

                   35cm/14 inch high. Collected May 2004 in Austria.

                                                            Pot: Tokoname.

Above: And here is the “PEE PINE” in its new home. There is no fine wiring on this tree at this moment so it looks a bit rough. But even so, I do think that it has come a long way in the 5 years since I collected it. It already shows a lot of character for such a small and fragile tree.

Cheers,

Hans van Meer.

Info: karamottobonsai@hotmail.com

————————————————————————————————- 

Hi, everybody,

yesterday I took some pictures of one of my Juniperus communis Yamadori that I would like to share with you all.

Above: This tree is a real problem child, design wise that is. (Yellow arrows) All live lines have died back and disappeared from this, it’s best front side!

Above: And styling it from this side is, because of the strange way the long base of the trunk grows backwards and the straight first part, really difficult. But a styling possibility has come to me, but I will only know if it is possible to style it that way, when I repot the tree again in a few years time. This is why I like to work with virgin Yamadori material, they sometimes really make me stretch my imagination to solve or incorporate their wonderful problems into a successful Bonsai. And if it all works out in the end, the tree will be much more interesting and unique, because of all the natural but odd features that were used in its design! There is so much beauty to be found in imperfection!

Below: And a picture of a small planting on a piece of petrified wood. Some 5 years ago I found, close to where I live, this plant covering the ground surrounding a small pond in the dunes near the seaside. I took a small cutting and planted it on this piece of deadwood, it has been growing happily since then and it is covering it completely. I don’t know the name of this plant, but I do think it is a pretty combo!

Cheers,

Hans van Meer.

Info: karamottobonsai@hotmail.com

—————————————————————————

Hi, everybody!

Today, after way too long, I visited my old Bonsai friend Teunis Jan Klein in his Bonsai studio “DESHIMA”. It’s was great to see him again after such a long time! Besides being a talented and successful Bonsai artist and teacher, T, J has also managed to build a wonderful Bonsai studio. He has accomplished what most off use dream of! Because he is a Bonsai artist, he has a very keen eye and a good nose for finding good raw material. And sure enough, after spending a lovely afternoon in his Bonsai studio,  I left his place with 4 very affordable and promising little urban Yamadori! He saved them from the shredder when a 45-year-old train station was torn down for a newer one. So all these trees are at least 45 years old.

First 4 pictures: Syringa microphylla “superba”. This is a real find in my eyes, I can’t wait to start working on this one!

Next 2 pictures: Weigelia florida “nana purpurea”. This is going to be a nice Shohin in the future.

Next 3 pictures: Berberis thunbergii. Hard to tell from this picture, but there is a lovely little cascade some were among those branches!

Last 5 pictures: Ilex verbicillata. Well, I think that the pictures say enough in this case! 🙂

      

     

     

     

  

I am really pleased with these little trees, it is a long time ago that I bought any trees and I am looking forward to starting designing and working on these new Bonsai projects!

If you are in search for good raw material, I can certainly recommend a visit to Teunis Jan Klein’s “DESHIMA” Bonsai Studio and School!

Wie op zoek is naar goed en betaalbaar ruw materiaal en nog veel meer op Bonsai gebied, kan ik zeker aan raden om eens langs te gaan!

“DESHIMA” Bonsai side: HERE.

Cheers,

Hans van Meer.

Info: karamottobonsai@hotmail.com

——————————————————————————————-

Note: You can find an earlier post from 2007 on this tree HERE.

Hi, everybody,

here is the short version of the repotting story of my Mugo uncinata.

Above:  The tree had no roots what so ever to hold it up when I planted it in this plastic container, but luckily it had on bought sides two thick deadwood roots sticking out that I could use to secure it tightly to the rim of the pot! The one on the left side was removed a couple of years ago, leaving only the one on the right to hold the tree in place. Because a lot of roots were even showing through the soil surface, I took a chance to cut the one on the right and repot the tree into the Tokoname pot that, until a few hours ago,  the “SWAN” used as a home.

             

            Above: Cutting the roots free from the side of the pot.

            

Above: Lifting the tree to one side to free it from the pot. Look at my anxious face! 🙂 

I could not believe my luck! Look at a number of new roots the tree had managed to produce out off noting!

Above: Close up of the only old root that this tree had when I repotted it the first time, all the others had been cut and sawed off by the ….. that collected it!

  Above: Close up of the cutoff remains of the one and only root this tree had when I repotted it the first time! It is so amazing that this tree survived and is doing so well!

            

  Above: Look how nice all these new roots have grown around that supporting block of wood in the middle.

             

 Above: Lifting it up to put it into its new pot had to be don really carefully. All these roots you see here are really young and thin, and there was a serious change that they could break off when they were not enough supported by me!

Above: I find it still amazing how many roots this old survivor has produced from nothing!

Above: This is how the tree produced all these new roots, they grow out of the bark that was covered under the soil line, amazing isn’t it?!

               

              Above: Working the soil in between the roots with a chopstick.

          Above: Still working the soil in between the roots with a chopstick.

 

              

              Above: Happy happy happy, happy happy happy! 🙂

Above: Because the planting angle is changed so much, I had to reposition one of the main branches. I used a wood clamp to bring the thick branch into place, then I secured it with a wire to another thick branch to hold it in place.

              

Above: I am really pleased with how the tree looks for now. From now on it will only receive a lot of T.L.C!

Next year I will start working on the foliage and at the end of that same year I will start working on the deadwood and rewire the tree.

The longer version of this story will be posted soon on my Karamotto Bonsai site!

 It is a real honour to work on such a miracle of mother nature, it makes me realise how lucky I am!

Hope you like this amazing tree just as much as I do?!

Cheers,

Hans van Meer.

Info: karamottobonsai@hotmail.com

 

 

Hi, everybody.

Its a bit later than was expected, but here is as promised the short version of the repotting of the “SWAN”!

Above: With a special tool the roots are separated from the sides of the pot.

Above: The yellow line shows more or less the desired pot size. So this repotting I want to look how close I can get to that imaginary line, without harming the tree of course! During the first repotting of the “SWAN”, I had seen that most strong roots grew just from that side of the tree, so I knew that this never was going to be easy! I would soon see how ready this tree was to fit into this smaller pot. It was all very exciting, to be honest! 🙂

Above: looking for my keys. 🙂

Above: Were necessary, roots were cut to free the tree from its pot.

Above: This darker soil in my hand is still the original soil from the mountainside where this old Pine grew. I had to remove all of it this time, to prevent the possibility of future root rot!

Above: Too long roots were cut back.

Above: This is a problem root! It sticks out way to far to be able to fit the tree in this smaller pot. But is too important for the health of the tree to just cut it off! So I wired it, just like you would do with a branch if you want to bend it!

Above: (Yellow arrows) Here I am carefully bending the branch inwards towards the base of the tree. (A) shows were this thick root grows from. The yellow dots show just how much the roots were bent!

Above: Quick dear, this thing is really heavy! 🙂

Above: Next time, if possible, the tree will be planted just that little bit more to the left side. But for now, this is as far as was safe. But even like this, the tree looks more balanced than ever before. That is what makes Bonsai designing so interesting when you start working on a tree, you have to create a future image for your Bonsai in your mind. With only that mental image, you have to make all kinds of big decisions and then you wait and work for half a century or so, to find out if the plans you made all those years ago were any good! That is what makes this art form so special to me!

The piece of wood holds the tree into its place, so I can carefully work the soil in between the roots. Making sure no air pockets are left between the roots.

Above: Close up of how the problem root is bent. The whole tree is pushed as much as possible against the left side of the pot, This squeezes the thick root against the pot side, making it move even more inwards (yellow arrow).

Above: Working the soil in between every root, with a chopstick. It took ages, but it is a to important task to rush!

Above: The “SWAN” in his new (temporary) pot. It was watered until the water that runs out of the pot was clear. The wires that you see hanging out of the pot were there to secure the tree. but they were not necessary and will be removed.

I have to admit that I am over the moon with this result. The tree is now already planted more to the left than I had hoped for before I started!  If I can manage to planed it about 2,5 cm/1 inch more to the left in the next repotting it would just be perfect! The wooden block will stay there until I know for sure that the tree can hold this position by itself.

In a few days the complete story of this repotting, with much more pics, will be posted on my Karamotto website. So if you like it, go check it out in a few days time.

Tomorrow I will post the pictures of the other big Pine repotting I did on this same day.

Hope you like how much the tree has changed already?

Cheers,

Hans van Meer.

Info: karamottobonsai@hotmail.com

———————————————————————————————

Hi, everybody,

well, as good a day as yesterday was, today was a #*x# day! I spent most of this sunny day selecting, working and resizing the best pics for yesterdays repotting story! This night I had planned to post some here on my blog, but as always, something went wrong again. My adobe photoshop program had filed all the pictures, some 83 I had worked on, as empty files. This has never happened before and I have no idea why it did it now??? But luckily I was able to recover 15 or so of them through the “resend worked on” option in my photoshop, but all the others I had worked on are lost! If I am op to it, I will start working again on them tomorrow.  For now, I have seen more than enough of my PC, I am off to bed. So, SORRY! But you guy’s will have to wait a day longer, but here are 2 pics that I managed to save! 

Here is a close up picture of the soil mixture I used in more or less equal parts. I used it well sifted into 3 different sizes. A layer of pretty large sized particles on the bottom of the pot, then a thicker layer with large sized particles and than the rest of the pot is filed up with the biggest layer of medium-sized particles. With this soil mixture, you can water every day if necessary!

      

Halfway through cleaning out the old mountain soil that is left in the rootball. On the right front side of the rootball you can just make out the thick problem root that I have bent with the help of wire. All the pictures I prepared of this process are lost, but I will post them as soon as I finished working on them.

So I hope 2 C U all later with more!

Cheers,

Hans van Meer.

Info: karamottobonsai@hotmail.com

———————————————————————————————

Hi, everybody,

it is too late for me to sort out all the pictures I shoot today and then post them, but I promise I will do so tomorrow. Today I not only gave the “SWAN” a new home, but I also repotted one of my other favourite Pines. It was just after midnight that I finished working. I turned off all the light but kept one led spot burning right on the second Pine I repotted today. And with a well deserved Heineken in my hand, I saw this picture from my living room. And I must say, that I am a happy man, who is not complaining! It has been a really good. GOOD DAY!!!

                                                      Pinus uncinata.

  

Oh, and of course, a quick shot of me lifting the “SWAN”! 🙂

Tomorrow I will post more pictures, now it is off to bed for me.

Cheers,

Hans van Meer.

Info: karamottobonsai@hotmail.com

—————————————————————————–

Hi, everybody,

I spent most of this day sifting and mixing my soil in preparation for tomorrow’s repotting of the “SWAN”. This is not one of my favourites thing to do anyway, but to do it with this back off mine was murder! But everything is finally mixed and prepared in 3 different grain sizes.  I even prepared the pot, so that tomorrow morning,  I can start right away with the actual repotting. I cant hardly wait to see if I can fit the “SWAN” into his much smaller new home?

                                 Above: The new temporary pot from China.

Above: All the soil ( akadama, kiryu, bimbs) I mixed in three different grain sizes.

Until tomorrow!

 Cheers,

Hans van Meer.

Info: karamottobonsai@hotmail.com

—————————————————————————————————–

————————————————————————————-

Hi, everybody,

today I repotted the Pinus sylvestris Literati I styled in May this year.  LINK

I had planned to plant it into a slightly smaller pot, but that proved to be to much of a risk for this tree! So I (gladly) planted it into an old pot that used to belong to Saburo Kato. Years ago my friend Dany User, owner of the Ginkgo Bonsai Centre in Belgium, brought a couple of exclusive old pot’s back from his visit to Mr Kato’s Garden and I was lucky enough to be able to buy this wonderful pot from him! To think that this great master, whose work I so greatly admire, might have used this pot under need some of his own trees in the past, makes this pot just that bit more special to me!

Just look how ingeniously they made anchor point on the bottom of the pot to run your wire trough. So you are able to firmly secure your tree to this shallow pot.

Close up of one of those handy anchor points in the pot. In this way no wires have to run under need the pot, that would look ugly and make the pot unstable! Clever isn’t it!

  

After 4 years in this pot, the tree had grown a pot full of healthy looking roots, covered with the all-important Mycorrhizal fungi. I saved as much as possible of this white gold to mix into the new soil mixture, to help the tree’s recovery!

         

The tree in his new home. The piece of wood you see at the base of the tree is placed there to push and hold the tree more forward. The tree is not exactly in the position that I would have preferred, but it is close enough for now. I had to keep the health of this tree in mind! From now on this tree’s roots, will have 3 seasons to grow into the shape of this new pot, then at the next repotting it will be much easier for me to cut some roots and plant it a bit deeper,  just the way I want it!  I think that in the future this Literati Pine is going to look pretty cool in this pot! It proves that even out off not the best possible material in the world, you can still make a pleasing looking Bonsai!

Next Sunday I will repot the “SWAN” into its new pot that I bought 2 day’s ago at Lodders Bonsai centre. I can’t wait to see if he will fit into it! I’ll keep you all posted!

Cheers,

Hans.

Info: karamottobonsai@hotmail.com

————————————————————————-